Playing with RPI and D2000

Miroslav Kunsch

August 04 2020, 1 min read

Recently, we have started creating a series of blogs for you called How to - IPESOFT D2000 and Raspbery Pi. With a series of these articles, we want to acquaint you in  a simple way and show you a few interesting uses of IPESOFT D2000 on Raspberry PI. Our effort is to describe step by step the way we set up IPESOFT D2000, communication, prepared visualization, set alarms and, of course, data archiving.

First one is about the demonstration how to make a project with an RGB LED on a Raspberry PI using D2000 software.

Second one is introduction about the project after the first tutorial, how I prepared a project for controlling the DC motor by D2000 software.

Third one is introduction about this project in this tutorial,  how to create a project with sensors which use the analog signals as an output on a Raspberry PI by using D2000 software.

How to - part 1 - RGB LED Control by D2000 Rasperry PI
How to - part 2 - Raspberry Pi and DC motor
How to - part 3 - Communication Raspberry and AI sensors

If you would like this series of examples, or if you also have interesting examples of using IPESOFT D2000 (not only on Raspberry PI), we will be happy if you contact us via our contact form, discussion forum, or directly to d2000@ipesoft.com.  

We are already preparing other interesting demonstrations and applications for you today, which will soon be added to the blogging section of the How to series.

Subscription was successful

Thank you for submitting form.

Image Description

Your message was successfully sent.

Thank you for submitting the form.

Image Description

Your message was successfully sent.

Thank you for submitting the form.

Image Description